Wanted "mesh"

[andy Burgess]

looking for sheets of weldmesh ,zinc coated or galvanised 1" square by whatever .any other sizes or options considered .would like them to be local if possible (rolls are ok in the car) but sheets may have to be by courier ?? thanks in advance

[harry h]

looking for sheets of weldmesh ,zinc coated or galvanised 1" square by whatever .any other sizes or options considered .would like them to be local if possible (rolls are ok in the car) but sheets may have to be by courier ?? thanks in advance

 

Andy I bought a sheet the other day 1" 8x4 galvanised 10 gauge and took a battery operated grinder with me and cut it down to size,the 10 gauge is real thick stuff, mind the higher the gauge the thinner it is

I got mine from my local Grampian Steel dealer cost £54.00, if u try some of the steel dealers near you they might be able to help you.

[andy Burgess]

Andy I bought a sheet the other day 1" 8x4 galvanised 10 gauge and took a battery operated grinder with me and cut it down to size,the 10 gauge is real thick stuff, mind the higher the gauge the thinner it is

I got mine from my local Grampian Steel dealer cost £54.00, if u try some of the steel dealers near you they might be able to help you.

thanks for the reply Harry ,will see if anything is offered over the next few weeks ?

[BLACK W F]

thanks for the reply Harry ,will see if anything is offered over the next few weeks ?

try home base or B&Q

[eastcoaster]

looking for sheets of weldmesh ,zinc coated or galvanised 1" square by whatever .any other sizes or options considered .would like them to be local if possible (rolls are ok in the car) but sheets may have to be by courier ?? thanks in advance

Andy I bought mine from mesh direct on the internet I bought a full roll £85 it was here in 5days.

[HOMER49]

looking for sheets of weldmesh ,zinc coated or galvanised 1" square by whatever .any other sizes or options considered .would like them to be local if possible (rolls are ok in the car) but sheets may have to be by courier ?? thanks in advance

 

Hi Andy

About to order 6 tomorrow from steel stock holder in

Forth Lanarkshire

They are 8 x 4 25mm square, galvanised, 3mm thickness

They make a cracking strong aviary

Last year price was about £25 inc vat uplifted

Cheers

Homer 49

If your looking for clips to screw these sheets onto wood

let me know company is in Newbridge (clip like hump back bridge)

[alex wight]

fh brundle is who i use and £40 per sheet plus vat, £10.00 carriage. Its the mesh that i use for the grills in the widowhood boxes that i do??

 

regards alex

[airdrie2]

was going to tell you company in newbridge ind est the same as hommer49

[jakie]

andy,cut the frame away from old herras fencing,free wire,identical to whats on Kinnear loft front

[andy Burgess]

andy,cut the frame away from old herras fencing,free wire,identical to whats on Kinnear loft front

I was looking at having smaller mesh ,due to sparrows going through . I have come up with a solution .but I will wait & see

 

thanks for all the replies .

[aye ready]

http://www.fhbrundle.com/mesh.htm

[Guest Gareth Rankin]

Hi Andy

About to order 6 tomorrow from steel stock holder in

Forth Lanarkshire

They are 8 x 4 25mm square, galvanised, 3mm thickness

They make a cracking strong aviary

Last year price was about £25 inc vat uplifted

Cheers

Homer 49

If your looking for clips to screw these sheets onto wood

let me know company is in Newbridge (clip like hump back bridge)

Looks like Norman is once again going to be very busy.

[walterboswell59]

i got mine from scrap yards protection for shop windows cost buttons get a yellow pages and phone around the yards and you will get them 8 by 4 8 by 3 6 by 4 and 6 by 3

[Guest tartan4471]

ANDY, BRUNDLE NEW BRIDGE IS YOUR BEST BET,I GOT TWO ROLLS AT A FAIR PRICE, PHONE THEM UP

[andy Burgess]

ANDY, BRUNDLE NEW BRIDGE IS YOUR BEST BET,I GOT TWO ROLLS AT A FAIR PRICE, PHONE THEM UP

thanks pal , just had a look "on-line" ,some great stuff too