kirky Posted January 20, 2012 Report Posted January 20, 2012 well i cant get to blackpool so spending my time building a kit box for the rollers that are being picked up at blackpool by a mate, got the floor done so far, will take some pics as i go on.
OLDYELLOW Posted January 20, 2012 Report Posted January 20, 2012 get some taken of all stages Would of helped you out if weren't laid up
kirky Posted January 20, 2012 Author Report Posted January 20, 2012 get some taken of all stages Would of helped you out if weren't laid up well thats the floor done so far, waiting for drill to re-charge.
Guest Tooshy Boy Posted January 20, 2012 Report Posted January 20, 2012 WELLDONE MATE WITH THE WEATHER AND WINDS WOULD NOT BE EASYER TO TIE IT DOWN JUST NOW SO THE WIND DOSE NOT MOWE IT.///
kirky Posted January 20, 2012 Author Report Posted January 20, 2012 WELLDONE MATE WITH THE WEATHER AND WINDS WOULD NOT BE EASYER TO TIE IT DOWN JUST NOW SO THE WIND DOSE NOT MOWE IT./// now that i have put sides and back on i have put angle iron down in to ground and bolted to the back will be doing the same at front.
OLDYELLOW Posted January 20, 2012 Report Posted January 20, 2012 getting there :emoticon-0137-clapping:
Guest Tooshy Boy Posted January 20, 2012 Report Posted January 20, 2012 WELLDONE MATEMAKE SURE IT IS TIED DOWN WELL NO USE PUTTING UP A LOVELY LOFT FOR THE WIND TO WASTE IT .///
kirky Posted January 20, 2012 Author Report Posted January 20, 2012 getting there :emoticon-0137-clapping: will get a bit more done tomorrow and sunday will be finished monday, then just aviary to put on side.
kirky Posted January 22, 2012 Author Report Posted January 22, 2012 this is how it looks now mark with front on, still got roof and nest boxes to do,
kirky Posted January 22, 2012 Author Report Posted January 22, 2012 LOOKING GOOD MATE thanks mate its held up to the wind so far and it is windy hear, have got 2 more steel rods to go on the front yet set in concrete, already got 2 at the back thay are holding it for now.
Guest Tooshy Boy Posted January 22, 2012 Report Posted January 22, 2012 GET IT WELL TIED DOWN MATE WHILE YOU CANGET AT IT EASY ALL THE BEST MATE
kirky Posted January 23, 2012 Author Report Posted January 23, 2012 Well i managed to get it done in time for the rollers that came today, thanks OLDYELLOW for the loan of your jig saw. .
kirky Posted January 23, 2012 Author Report Posted January 23, 2012 looks very good Gra , well done.thanks it only cost me £50 in total to build, 6x4 gona put a 6x4 aivary on the side.
andy Burgess Posted January 23, 2012 Report Posted January 23, 2012 thanks it only cost me £50 in total to build, 6x4 gona put a 6x4 aivary on the side.a bargain , thats better still
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now