Unikon And Bricon

[thomasd]

i use bricon im in 2 clubs can someone tell me why i can go through Unikon in one club and cant in another club is ther a problem with ther system i cant get my head round it

[thomasd]

nobody know ?????

[PIGEON_MAN]

i use bricon im in 2 clubs can someone tell me why i can go through Unikon in one club and cant in another club is ther a problem with ther system i cant get my head round it

Must be a problem with their system, we have both systems in our club and have no problems, although I usually keep the two separate the times I had used the one through the other there wasnt a problem.

[ovy1255]

when i use my bricon on a unikon master system firstly i get the radio time signal for the unikon ringer as bricon will not work with manual set -also the unikon master must be disconnected from the ringer befor connecting the bricon and only use the univese lead supplied by bricon=on connecting the bricon should power up-is this happening?

MARK PALMER the bricon rep willhelp if you give him a ring.

[demolition man]

when i use my bricon on a unikon master system firstly i get the radio time signal for the unikon ringer as bricon will not work with manual set -also the unikon master must be disconnected from the ringer befor connecting the bricon and only use the univese lead supplied by bricon=on connecting the bricon should power up-is this happening?

MARK PALMER the bricon rep willhelp if you give him a ring.

 

I've never had to disconnect the unikon ringer before connecting the bricon, i just connect the lead and bobs your uncle

[demolition man]

i use bricon im in 2 clubs can someone tell me why i can go through Unikon in one club and cant in another club is ther a problem with ther system i cant get my head round it

 

the club your having problems with insure they press the "C" button if the unikon states that the base needs a service this may be the problem.

[PIGEON_MAN]

I've never had to disconnect the unikon ringer before connecting the bricon, i just connect the lead and bobs your uncle

Same here no problems.

[thomasd]

i do disconnect the unikon then put bricon in the club it works no prombem thats wat i do the reason i want my system to work through the unikon system is because the club it doesnt work they got a new printer for unikon system and it will not work with the bricon master system i have no clue why i had to use the t3 clock expletive remove why why why doing my head in even unikon has a problem with the printer takes half an hour to get a print out they just havnt a clue what ther doing.

[blue bar]

What sort of printed does the unkion use as the bricon one needs a dos capable one

[PIGEON_MAN]

What sort of printed does the unkion use as the bricon one needs a dos capable one

We use the same printer on both systems OKI 2400.

[thomasd]

not sure wat type ill find out

[almeehan]

not sure wat type ill find out

Printer is not the problem unless it is faulty. If a printer works on the unikon it will work on any ets system, the requirements are the same. What message are you getting on the speedy clock when you try to mark? It should give a reason.

[thomasd]

no reason just will not print when setting time on bricon it suppose to print a time set it just will not print ive set the time 30 times no joy

[PIGEON_MAN]

Probably a silly question but if you are using a radio controlled clock to set the time on the Bricon is the little mast showing in the left hand corner.

[thomasd]

im using the gps

[almeehan]

Think you need to provide more information. Are you using a really old printer? You need to come back with the exact make and model. You mention gps, are you using the bricon clubmaster with the speedy or are you marking bricon through the unikon club system? It sounds like an old incompatible printer but need the information to confirm.