walterboswell59 Posted March 2, 2016 Report Posted March 2, 2016 got a second hand brother hl 14 lazer printer to print off when im training my birds just fitted a new cartridge and its going through the motions but no print just blank paper when trying to print off whats on my clock orange data light comes on dont know if its supposed anyone any idea
dal2 Posted March 2, 2016 Report Posted March 2, 2016 got a second hand brother hl 14 lazer printer to print off when im training my birds just fitted a new cartridge and its going through the motions but no print just blank paper when trying to print off whats on my clock orange data light comes on dont know if its supposed anyone any ideaDid you take tape aff cartridge
walterboswell59 Posted March 2, 2016 Author Report Posted March 2, 2016 Did you take tape aff cartridgedont see any tape steven where would it be its a massive cartridge compared to the wee epsom one i had
dal2 Posted March 2, 2016 Report Posted March 2, 2016 dont see any tape steven where would it be its a massive cartridge compared to the wee epsom one i hadSometimes they have a protective bit of plastic or tape you have to remove from a new cartridge. Usually yellow.
dal2 Posted March 2, 2016 Report Posted March 2, 2016 dont see any tape steven where would it be its a massive cartridge compared to the wee epsom one i hadDid you load new drivers?
walterboswell59 Posted March 2, 2016 Author Report Posted March 2, 2016 Sometimes they have a protective bit of plastic or tape you have to remove from a new cartridge. Usually yellow.dont think so with this printer steven its a big roller at the front but ill check worth a try
walterboswell59 Posted March 2, 2016 Author Report Posted March 2, 2016 Did you load new drivers?whits that aboot just plugged it into my clock where would drivers go lost me now which is not hard when it comes to this stuff lol
dal2 Posted March 2, 2016 Report Posted March 2, 2016 whits that aboot just plugged it into my clock where would drivers go lost me now which is not hard when it comes to this stuff lolSorry Walter thought ye were using it on yer computer........which might be the best idea to check its working. Just plug in yer USB and the pc/laptop should do the rest
walterboswell59 Posted March 2, 2016 Author Report Posted March 2, 2016 if it does not work off the clock its no good to me stevie computer is in the living room and the printer is outside beside my clock some of the guys on here use them maybe one them will be able to help our club has one but our sec is away on holiday the wee epsom one just plugged into the clock and away it went now ive got one one the size of a spin dryer and it will not go lol
bullcock Posted March 2, 2016 Report Posted March 2, 2016 https://www.youtube.com/watch?v=470mJNbSTvwTry this link for youtube.
soupie Posted March 2, 2016 Report Posted March 2, 2016 Walter what model of printer is it? HL14$$ ?? You can check if the problem is with the printer or the clock/printer setup by disconnecting the clock and getting the printer to print a test page. soupie
walterboswell59 Posted March 3, 2016 Author Report Posted March 3, 2016 Walter what model of printer is it? HL14$$ ?? You can check if the problem is with the printer or the clock/printer setup by disconnecting the clock and getting the printer to print a test page. soupieits a hl 1430 soupie tried shaking the new cartridge
soupie Posted March 3, 2016 Report Posted March 3, 2016 Disconnect from clock, turn off and follow these instructions to get the printer to print a test page, this will tell you if the problem is with the actual printer or the printer/clock setup. 1 Turn off the printer.2 Make sure that the front cover is closed and the power cord is plugged in.3 Hold down the Control panel button as you turn on the power switch. All the LEDs light up and thengo off again. Keep the Control panel button pressed down until the Drum LED comes on. Whenthe Drum LED comes on, release the Control panel button.4 Press the Control panel button again. The printer will print a test page. user manual for this printer http://www.manualslib.com/manual/21957/Brother-Hl-1430.html
walterboswell59 Posted March 4, 2016 Author Report Posted March 4, 2016 Disconnect from clock, turn off and follow these instructions to get the printer to print a test page, this will tell you if the problem is with the actual printer or the printer/clock setup. 1 Turn off the printer.2 Make sure that the front cover is closed and the power cord is plugged in.3 Hold down the Control panel button as you turn on the power switch. All the LEDs light up and thengo off again. Keep the Control panel button pressed down until the Drum LED comes on. Whenthe Drum LED comes on, release the Control panel button.4 Press the Control panel button again. The printer will print a test page. user manual for this printer http://www.manualslib.com/manual/21957/Brother-Hl-1430.htmlthanks soupie did what you said and got a test printout ok but still blank pages when pressing printout on my unikon clock
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now