Decorators?

[Guest spin cycle]

any pro decorators on here?? question i have is this......today i was coating some new plaster with 10 - 1 water pva. it did a good job but the best thing was there were no drips off brush or anywhere...what i'm wondering is can i put a little pva in with the emulsion paint to stop that dripping??

[grizzal]

never done it,can i ask did it soak into the plaster ok, as we use half paint and half

water mixed to get it into the plaster.the last thing you want is it sitting on the top

of the plaster .have never put in paint.

[b.massey]

You should know if it soaked into plaster correctly as it leaves a shine. Thats what your after. Never tried it in paint and would not advice on it either

[Guest spin cycle]

never done it,can i ask did it soak into the plaster ok, as we use half paint and half

water mixed to get it into the plaster.the last thing you want is it sitting on the top

of the plaster .have never put in paint.

 

 

went in well....not shiny though

 

You should know if it soaked into plaster correctly as it leaves a shine. Thats what your after. Never tried it in paint and would not advice on it either

 

 

thanks...probably not try it then

[rembrant2coo]

put in a cup fae to 2-5 litres of emulsion it should be fine and mix it well with a stick or spatula