Advice About New Loft

[p charlton]

ive near done my 16 foot loft. its got a open front due to my pfl. i was going to get a large extracter fans but i dont think they will be much use due to the front being open so i am thinking of cutting a 4in gap along the back of the loft at the top and bottum. what would be best any advice would be welcome

[sapper756]

ive near done my 16 foot loft. its got a open front due to my pfl. i was going to get a large extracter fans but i dont think they will be much use due to the front being open so i am thinking of cutting a 4in gap along the back of the loft at the top and bottum. what would be best any advice would be welcome

 

 

Make sure no vermin can get into your loft m8

[OLDYELLOW]

if was me id of had 1ft alway round bottom mesched with hinged boards so could be opened / closed 4ft/1ft mesch/landing board in middle then 1ft all round top meshed with hinged boards that double up as landing boards then you can regulate air in loft and stop rain getting in

[p charlton]

soz the gap will have cm hole wire neeting on like the front what way do you think will work

[Guest joshdonlan]

mice may still be able to get through 1 cm gap. Look on Taylors site, i think they sell 0.5 x 0.5 mesh, thats what i used

[Guest shippy]

ive near done my 16 foot loft. its got a open front due to my pfl. i was going to get a large extracter fans but i dont think they will be much use due to the front being open so i am thinking of cutting a 4in gap along the back of the loft at the top and bottum. what would be best any advice would be welcome

 

 

dont think you will have any probs ventilation wise the way you have built the loft best of luck

[showman]

Any wire you use on loft, to stop vermin, has to be 1/4" square. Anything else, mice will definitely still get through. Can be hard to get in roll form, but is available in 'panel' form from good hardware outlet.