Mark Palmer Posted December 7, 2007 Report Posted December 7, 2007 RPRA ANNOUNCEMENT BRICON ETS The RPRA Clock Committee has recently met with Bricon management. After discussion and tests the Committee is now satisfied that the Bricon marking system is compatible within the Unives 1.7 protocol. The RPRA Clock Committee is therefore happy to announce that the Bricon club marking system’s approval for use is reinstated forthwith. In addition, the RPRA will require all manufacturers of approved ETS equipment to produce an operator's guide for their respective equipment detailing how to set up the same and operate it with the approved equipment of other manufacturers. The RPRA will also, in conjunction with all ETS manufacturers, introduce a Clocksetter's Guide for ETS. Peter Bryant General Manager Royal Pigeon Racing Association
Fair Play Posted December 7, 2007 Report Posted December 7, 2007 Looks like RPRA may have jumped the gun - anything to do with legal action : : :!!!!!!!!!!!!
ACE LOFTS Posted December 7, 2007 Report Posted December 7, 2007 Looks like RPRA may have jumped the gun - anything to do with legal action : : :!!!!!!!!!!!! ;D ;D ;D ;D ;D
Mark Palmer Posted December 7, 2007 Author Report Posted December 7, 2007 Hello Thank you to everyone who rightly kept faith in the Bricon Club-Master system. The reason that it was re-instated by the RPRA was because it was clearly demonstrated to them that the system was fully compatible not only with the Unives 1.7 protocol but also with every other brand of ETS. QUITE SIMPLY THE BRICON CLUB-MASTER SYSTEM WAS FULLY COMPATIBLE, BEFORE, DURING AND AFTER THIS SITUATION CREATED BY RPRA. MARK PALMER UK Distributor for Bricon.
gangster Posted December 9, 2007 Report Posted December 9, 2007 well frans nolemans did the demo at failsworth and he went through the complete system and showed it was compatable with the others in front of a room full of flyers..so it mistifies me as to were the non compatability comes from...........???????????????????????????
Mark Palmer Posted December 10, 2007 Author Report Posted December 10, 2007 I have an even better idea ..... I actually know. I have all of the correspondence in the matter including the main reports that the RPRA based its decision on. I know exactly where the original 'finger pointing' came from, and you would be surprised where from (or maybe not). !!!! MARK PALMER UK Distributor for Bricon.
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now