roof !!!!!

[Guest Grasshopper Lofts]

this is my dilema how to do the trusses in the red circle connecting one to the other and how to do the gully advice already given about using lead but unsure as to the construction of it.

[little sam]

PM JOHN HOWMAN HE HAD TO HAVE THIS SORTED WITH THE PIGEON-CHAT ONELOFT RACE  

[DOVEScot]

this is my dilema how to do the trusses in the red circle connecting one to the other and how to do the gully advice already given about using lead but unsure as to the construction of it.

 

I will post you some pics tomorrow, it would be esier for you to do a T join than an L join

[Guest Grasshopper Lofts]

thanks sam

[little sam]

NO PROBS MATE  

[Guest slugmonkey]

I will take some picts inside my loft I used a ridge board and then cross braced it on the sides it is very strong I have some pictures I tookn and will load them later

[Guest Grasshopper Lofts]

I will take some picts inside my loft I used a ridge board and then cross braced it on the sides it is very strong I have some pictures I tookn and will load them later

 

that would be great thanks

[Guest Grasshopper Lofts]

 

I will post you some pics tomorrow, it would be esier for you to do a T join than an L join

 

how do u do a t join mate

[Taylorsloft]

my loft is the same as that one i will take photos tomorrow  

[Guest Grasshopper Lofts]

thanks mate

 

[DOVEScot]

 

how do u do a t join mate

 

You make one complete shed and join in another at right angles, unless you are really good at angles and tiling making an L shaped loft takes a bit of doing

The T shape can be any distance from the gable or in line with it, you will only need lead gulleys down the joins and ridge caps along the apex

Rough drawing

[Guest Grasshopper Lofts]

thanks DOVEScot much appreciated

[Guest Grasshopper Lofts]

cheers mark

[OLDYELLOW]

[DOVEScot]

 

We'll make a joiner out of you yet ;D ;D ;D

[OLDYELLOW]

As dovescot says fully tiled at back with angles cut in on side , if you use joists for holding floors up can use a joist bracket as will fit this design

[OLDYELLOW]

oops should be 2 bars either side of the support but obvious lol , but all should easily screw together

[chickadee]

 

We'll make a joiner out of you yet ;D ;D ;D

 

Aye more chance of that than making Dovescot a decorator anyway. ;D ;D ;D

[Guest]

 

Aye more chance of that than making Dovescot a decorator anyway. ;D ;D ;D

 

pmsl  ;D ;D ;D ;D ;D

[DOVEScot]

 

Aye more chance of that than making Dovescot a decorator anyway. ;D ;D ;D

 

p*ss off back to your http://fancypigeonchatter.forumakers.com/ or it will be another three years before you get the hallway done :X :X :X

[DOVEScot]

 

pmsl  ;D ;D ;D ;D ;D

 

Shut up you, away back to work ;)

[chickadee]

 

p*ss off back to your http://fancypigeonchatter.forumakers.com/ or it will be another three years before you get the hallway done :X :X :X

 

Aye and the bathroom, the cabin, the loft.............. ;D ;D ;D

[OLDYELLOW]

ah a womans works never done as they say , i think its called D.I.Y for a reason chickadee

[chickadee]

ah a womans works never done as they say , i think its called D.I.Y for a reason chickadee

 

Aye, sadly, that just may have to be the case....   :(

 

 

[DOVEScot]

 

Aye, sadly, that just may have to be the case....   :(