Guest joshdonlan Posted January 24, 2010 Report Posted January 24, 2010 Got the old fella to help me knock up 4 floor grills today made from 1" x 1" and 40mm x 40mm cost under £10 to fit 8ftx 3ft section. Question: Do you put any litter at all under the grills? A thin layer of easybed, or loft white, or just let the droppings build up? Thanks
mcclaff Posted January 24, 2010 Report Posted January 24, 2010 I would put a mix of sharp sand and lime under them if it were me. Any chance of a photo of the finished article josh as i was thinkin of makin some myself. Thanks
Guest bakes Posted January 24, 2010 Report Posted January 24, 2010 any sort of floor dressings would be spot on easy then to clean just lift grills scrap floor litter up put new layer down then put grill back down have you lifted the grills off the floor or just put them onto of the loft floor all the best
demolition man Posted January 24, 2010 Report Posted January 24, 2010 i put paper under mine then lift roll up the paper put in black bag and the dustman takes them away job done
walterbmasson Posted January 24, 2010 Report Posted January 24, 2010 Got the old fella to help me knock up 4 floor grills today made from 1" x 1" and 40mm x 40mm cost under £10 to fit 8ftx 3ft section. Question: Do you put any litter at all under the grills? A thin layer of easybed, or loft white, or just let the droppings build up? Thanks ive plastic cut to size had the same plastic for years shake loft white onto leave for 3 weeks very easy cleaned 10 min cleans my 3 sections
Guest joshdonlan Posted January 24, 2010 Report Posted January 24, 2010 Thanks guys. They are only 2 inches off the loft floor, but will keep birds clean during the week untill i get chance at the weekend to lift them up and clean them. I will take some photos in the morning. Vey easy to make. The local timber yard has good prices 82p per length 40mm x 40mm 8foot long. Im also going to make an aviary out of the stuff. Got some free mesh panels 8foot tall, so just the job
Guest joshdonlan Posted January 24, 2010 Report Posted January 24, 2010 thats the mesh Phil. Nah its fine, works well ;D
Guest joshdonlan Posted January 25, 2010 Report Posted January 25, 2010 i think i lied about the mesh size. I think its closer to 1/2" by 1/2" Heres a pic
p charlton Posted January 25, 2010 Report Posted January 25, 2010 ive just in the middle of making my 10 buy 3 it has a wire floor i am making two trys each 5foot i am going to use news papper cant be beat lol
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now