jupiter_19630 Posted January 21, 2007 Report Posted January 21, 2007 Got an stb wind up. The print out is fine at the bottom of the paper but quite faint at the top. Have changed the ribbbon and cleaned the print face. It appears that the striking pad is hitting the ink ribbon harder at the bottom than it is at the top. Any one had this problem, and does any one know how to rectify it?
Ian McKay Posted January 22, 2007 Report Posted January 22, 2007 Add a strip of good quality selotape to the rubber where it is not printing Keep building it up till it works. Cheers Ian
jupiter_19630 Posted January 22, 2007 Author Report Posted January 22, 2007 Thanks guys for your help. Where would I get a rubber pad from and are they easy enough to fit? If too difficult will try the tape. Cheers.
Ian McKay Posted January 22, 2007 Report Posted January 22, 2007 Hi Juipitor I have sent you a PM Cheers Ian
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now