Cheap Nestboxes

[mart]

Just about to buy some nestboxes ready for pairing my stock birds in dec.  i am a new starter and found some for sale on various web sites the cheapest is £69 for a set of 4.  does anyone know where i can get them any cheaper?  or is this a good price?

thanks

 

 

[DAVIDL]

 

 

  murray and mills do mail order deliveries.............and cheaper than those youve seen.   hope this helps.  

[Guest bakes]

i bought my boxs from murry and mills 55pounds for 4 bird

 

same as these ones

 

all the best.

[Guest youngzimmy]

WHAT IS WRONG WITH BUILDING THEM YOURSELF CHEAPER AT THE END OF THE DAY

[mart]

great il havea  look at murry and mills

 

thanks

[Guest pigeonguy147]

muttley-1 on here first class boxes about 35 quid set of four

[Guest bakes]

muttley-1 on here first class boxes about 35 quid set of four

 

dont no were mart is from mate but muttley dont send out of scotland if he did i would of got mine from him no worrys about thats

 

all the best

[pjc]

much cheaper to make your own!

[jonj1978]

i have some mate for sale if you want a look  at them on the swop section  widow boxes

 

£25 a set of 4  made from chip board.  

i have 3 sets   with widow plastic fronts...   second hand of course..

 

jon   barnsley area  south yorkshire

[rasbull]

I built my own, 1 piece of 8 x 4 chipboard will build you a set of 4! A set will cost you no more than £20 - £25 and thats with the fronts as well. You have to chop the board up correct to get it all out of one board. B&Q even did my cuts! Just a matter of screwing together! Easy and so much cheaper!

[Guest joshdonlan]

Do you have a plan for cutting rasbull? As when i used 8 x 4 ply i always need 2 sheets lol

[rasbull]

Its defo possible out of 8 x 4 from one sheet, swill send you a PM.

[thomasd]

can someone tell me the sizes to do widowhood boxes im wanting to make single fronts and abit in front of it so i can lock them out i need 30 boxes in a 12 x 6 shed

[thomasd]

can someone tell me the sizes to do widowhood boxes im wanting to make single fronts and abit in front of it so i can lock them out i need 30 boxes in a 12 x 6 shed

[Guest spin cycle]

can someone tell me the sizes to do widowhood boxes im wanting to make single fronts and abit in front of it so i can lock them out i need 30 boxes in a 12 x 6 shed

 

if you want 30 boxes then you're looking at a 6 column / 5 high combination .  a 20 inch wide box which would fit in width wise but height is going to be a problem....the bottom box is going to be virtually on the floor or the top box out of reach. i've 6 rows of 4  of a box that is 23' inch wide but it is VERY tight in a 12 ft section . i would like to cut down on numbers so that i didn't have to use bottom line as the boxes want to be at a nice height for working....particularly if flying W/H....at least thats what i would have thought. JMO (bunny)

[marmite]

30 boxes in a 12 x 6 is to many birds that means if all boxes full 60 birds when paired up i.e overcrowded  jmo